Projects – Wacky Wood Works

Projects

BY Nighthawk 28/04/2021

Fresh new look.

Painted and smaller bench and shelves put in behind the bar.

Concrete in.

Stain with Rosewood stain.

Go up stairs to the vinyl cutter and there we have it. Took about 30minutes to make. We delivered it the same night and the laughs were good.

Front support. Leaving enough stop sliding and room to remove the jars easily. (it is going in the pantry after all)

I do need to tweak the angle of the roll a little for the top ramp but as you can see I don’t have a lot of room. I have about a spare 5mm to raise the angle. I can’t just lower the back as then the can won’t roll forward. Hopefully it will be enough. It holds nine cans. If you take from the bottom the will roll the next can in. This is good for rotating your cans as the oldest then gets used.

Go to the camera and find the three pictures of Central Otago and get the them enlarged. Put in to frame and re-seal back. Now the three pictures we took look like a bought set.

Add the coasters to the coaster holder… and done. This took about 20 minutes to make and 10 minutes of that was finding the right bit of scrap wood. If you don’t have dowel you can buy a short length for about $2.00 from your local supplier ie; in NZ Mitre10Mega or Bunnings

Perfect. A lot tidier an a couple of spare slots for new chisels.

Very easy to hang shelf

GE DIGITAL CAMERA

Rehang out on the entertainment deck.

Add a bit of 1220 x 600 x 18mm ply to the top… ‘villa’ a work bench… but it is not finished yet.

One way or the other way…

It was build with scrap wood I had scored from a builders clean that was in the skip.

Pallet stool

My computer work station

GE DIGITAL CAMERA

GE DIGITAL CAMERA

GE DIGITAL CAMERA

Xaria Creates product tag etched and cut on the xTool D1

We made so several awards for Southern Rider (best bike, furthest traveled, direst bike, etc)

Aluminum business used as a display tag

Engraving the layout

Older cutting board with Xaria Creates logo.

Aluminum business cards

A metal dog name tag

Aluminum business used as a display tag

A front door sign painted MDT with outdoor vinyl signage

Bamboo Pens etched with names

One thought on “Projects”

05/07/2021 at 7:18 am

These are the various images of projects I have completed. Some are video’s some are blogs, and some are well I just did with blogging and or videoing.

Comments are closed.